Home
DFF-3D
Network Multi Beam Sonar DFF-3D
The DFF-3D is an innovative tool for efficient fish location and seabed profile surveying, utilizing new multi beam technology. Highly detailed images are derived from the combination of an advanced signal processing system and an amazingly compact multi beam transducer.
Compatible with NavNet TZtouch MFDs or Windows OS with TZ professional software.
Turn your NavNet TZtouch series MFD into a multi beam sonar that can see 120-degrees port to starboard, allowing you to see the depth and direction fish schools are moving, while displaying the seabed condition in real time. *Depending on bottom, water and installation conditions. DFF-3D with groundbreaking four modes bring a whole new dimension to your fishing. Cross section displays the real-time sea column echo in 120 degrees port and starboard. This mode aids in instantly understanding the distribution of bait fish and the water column condition. The 3D sounder history provides an intuitive and easy to understand 3D image of the seafloor, along with fish school icons. This mode is useful in a variety of situations, such as selecting a fishing hot spot and assessing the seabed condition. A single (directly under boat) or triple direction (middle, left and right) fish finder image is displayed simultaneously. The Triple beam display helps to understand the depth of fish targets and the seabed condition in each direction, as well as the direction the target fish are moving. Each beam angle and beam width are selectable. Side scan clearly displays the shape of structure as a high definition image in port and starboard direction. When paired with TZ (TIMEZERO) Professional software and the optional PBG module, the DFF-3D can generate up to 50 depth points per second to quickly create a highly accurate Personal Bathymetric Generated (PBG) database. The following screenshots show how the PBG database is dynamically created with the DFF-3D, in comparison with conventional Fish Finder models. The wide coverage of the DFF-3D beams helps draw the PBG map much faster (50 points per second) than any conventional Fish Finder. With conventional Fish Finders, the recorded area in the PBG database is limited to 1 point per second due to narrower scanning beams.Features
Visibly see the landscape and
fish schools at great depths in amazing detail
Depth : 130 m
Sidebar detection range is up to 200 m (over 650 feet)* in a 120-degree swath port and starboard direction.
Deep water, main beam penetration directly under the boat is approx. 300 m (over 980 feet)*.
The compact and fully featured transducer
Thru-hull mount transducer Ｂ54 (Bronze type) and SS54 (Stainless type) Transom mount transducer TM54
The compact transducer allows easy installation.
The built-in motion sensor (standard supply) stabilizes the display to give clear and stable images even under rough sea conditions.
Customize the display according to your needs
Depending on the situation and preference, a combination of screen modes can be displayed.
Modes Overview
Cross Section
3D Sounder History
Triple/Single Beam Sounder
Side Scan
It is suitable for searching the seabed and understanding the sea floor structure.TZ Professional v3 with DFF-3D
DFF-3D x TZ Professional v3, astonishing results.
Further details on TIMEZERO website.
https://mytimezero.com/tz-professional/dff3d-module
Note:
Specifications
GENERAL | TX FREQUENCY | 165 kHz |
|---|---|---|
| OUTPUT POWER | 800 W | |
| MINIMUM RANGE | 3 m | |
| BASIC RANGE | 5-1200 m | |
| DETECTION RANGE | 200 m* (Side Beam Best Performance) 300 m* (Main Beam Directly Under Boat) *Depending on bottom, water and installation. |
|
| BEAM ANGLE FOR TRIPLE BEAM SOUNDER | 20°-50° from right under | |
| DISPLAY MODE | Triple/Single Beam Sounder, Side Scan, Cross Section, 3D Sounder History | |
INTERFACE | LAN | 1 port, Ethernet 10/100Base-TX |
| EXTERNAL KP | 1 port (optional external KP kit required) | |
ENVIRONMENT | TEMPERATURE | -15°C to + 55°C |
| RELATIVE HUMIDITY | 93% or less at +40°C | |
| WATERPROOFING | IP55 | |
POWER SUPPLY | DFF-3D | 12-24 VDC, 1.4-0.7 A |
| RECTIFIER (PR-62, OPTION) | 100/110/220/230 VAC, 1 phase, 50/60Hz | |
EQUIPMENT LIST | STANDARD |
Spare Parts, Installation Materials |
| OPTION | External KP Kit Cable Assembly (2 m/10 m)
|
|
DIMENSIONS |
 |
|